Precautions for Using Lawn Shears Avoid The Embarrassment of "not Being Able To Cut, Clipping Grass"

In daily garden maintenance, lawn shears are important tools for trimming lawn edges and trimming local weeds. However, many people encounter the embarrassing situation of "not being able to cut" and "clipped grass" when using lawn shears, which not only affects work efficiency, but also easily damages the shears. In fact, as long as you master the correct usage method and pay attention to daily maintenance, these problems can be greatly reduced. This article will introduce several precautions for using lawn shears to help you easily trim a neat and beautiful lawn.

1. Choose the right lawn shears

There are many types of lawn shears, from traditional manual shears to labor-saving styles with gear assistance. When choosing, you should decide according to the area of the lawn, grass species and usage habits. For small family lawns, manual shears are sufficient; if the area is larger or the lawn is denser, you can consider using long-handled lawn shears or electric lawn shears. The material of the blade is also important. High-carbon steel or stainless steel blades are preferred, which are sharp, durable and not easy to rust.

2. Check and keep the blade sharp regularly

Blade blunting is the primary reason for "not being able to cut". Every once in a while, check whether the blade is sharp. If you find that the blade has a gap or becomes blunt, sharpen it with a whetstone or a special sharpener in time. When the blade is sharp, cutting grass stems is both labor-saving and clean, avoiding the "grass clamping" phenomenon caused by tearing.

3. Keep the cutting part clean

When cutting grass, grass juice is easy to adhere to the blade or joints, which will increase resistance over time, making the scissors run unsmoothly or even stuck. After each use, it is best to wipe the blade with a damp cloth and then dry it with a dry cloth. If necessary, you can apply a small amount of lubricating oil to keep the joints flexible.

4. Reasonably master the use of force and angle

Many people use too much force or improper angles when cutting grass, which will cause the grass to be clamped. The correct method is: hold the handle tightly, apply force evenly, keep the blade at an angle of about 30°-45° with the ground, and cut slowly along the direction of lawn growth to avoid pushing or pulling. This can not only cut the grass stems smoothly, but also reduce hand fatigue.

5. Avoid cutting too thick grass at one time

When the lawn grows too high or has a high density, it is difficult to cut through the thick grass layer in one lawn mowing. If you insist on cutting it all at once, the blade will be overloaded and it is easy to "clip the grass". It is recommended to pre-trim the lawn height with a trimmer, and then use lawn shears to trim the edges and details.

6. Pay attention to maintenance and storage environment

After use, do not throw away the lawn shears at will. The blades should be wiped dry, lubricated, and placed in a dry and ventilated place to avoid rust. When not in use for a long time, a protective cover can be put on the blade jacket or wrapped with soft cloth to prevent the blade from being blunted by knocks.

7. Regularly adjust the tightness of the scissors

After long-term use of lawn shears, the loose screws will cause the blade to open too large or too small, so that the grass cannot be clamped. Check the fixing screws regularly and adjust them to the tightness that closes the blade tightly without affecting flexible operation.

Conclusion

Although lawn shears are simple tools, they require correct purchase, use and maintenance. As long as you pay attention to the above matters, keep the blade sharp, clean, and operate in accordance with the regulations, you can avoid the trouble of "not being able to cut and the grass is caught". If you take good care of the tools, lawn mowing will be more effective with less effort, allowing you to easily create a clean and comfortable garden environment.